Header information and module parameters
The following figure shows the structure of the header information and module parameters.
Figure A-2
Channel parameters
The following figure shows the configuration of the channel parameters for channels 0 to 7.
x = 12 + (channel number * 2); with channel number 0...7
All unused bits and the bits or bytes marked as "reserved" must be set to zero.
You activate a channel parameter by setting the corresponding bit to "1" or the corresponding
value.
Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)
Manual, 12/2017, A5E39401560-AB
Drivers, parameters, diagnostics messages and address space
A.3 Parameter assignment and structure of the module/channel parameters
Header information and module parameters of data record 128
29