Pioneer MVH-350BT Owner's Manual page 17

Additional information
Common
Message Cause Action
AMP ERROR Unit fails to op- Check the speak-
erate or speaker er connection. If
connection is the message fails
incorrect; pro- to disappear even
tective circuit is after the engine is
activated. switched off/on,
contact your deal-
er or an author-
ized Pioneer
Service Station
for assistance.
USB storage device/iPod
Message Cause Action
FORMAT
Sometimes Wait until the
READ there is a delay message disap-
between the pears and you
start of playback hear sound.
and when you
start to hear any
sound.
NO AUDIO There are no Transfer the audio
songs. files to the USB
storage device
and connect.
The connected Follow the USB
USB storage de- storage device in-
vice has secur- structions to dis-
ity enabled. able the security.
SKIPPED The connected Play an audio file
USB storage de- not embedded
vice contains with Windows
files embedded Media DRM 9/10.
with Windows
Mediaä DRM 9/
10.
Message Cause Action
PROTECT All the files in Transfer audio
the USB storage files not em-
device are em- bedded with
bedded with Windows Media
Windows Media DRM 9/10 to the
DRM 9/10. USB storage de-
vice and connect.
! Connect a USB
N/A USB The USB device
connected to is Mass Storage
not supported Class compliant
by this unit. device.
! Disconnect
your device and
replace it with a
compatible USB
storage device.
CHECK USB
The USB con- Check that the
nector or USB USB connector or
cable has short- USB cable is not
circuited. caught in some-
thing or dam-
aged.
CHECK USB The connected Disconnect the
USB storage de- USB storage de-
vice consumes vice and do not
more than maxi- use it. Turn the
mum allowable ignition switch to
current. OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
Additional information
Message Cause Action
CHECK USB The iPod oper- Make sure the
ates correctly connection cable
but does not for the iPod has
charge. not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
ERROR-19 Communication Perform one of
failed. the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23 USB storage de- USB storage de-
vice was not for- vice should be for-
matted with matted with
FAT12, FAT16 or FAT12, FAT16 or
FAT32. FAT32.
Message Cause Action
ERROR-16 The iPod firm- Update the iPod
ware version is version.
old.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
STOP There are no Select a list that
songs in the contains songs.
current list.
NOT FOUND
No related Transfer songs to
songs. the iPod.
Bluetooth device
Message Cause Action
ERROR-10 The power failed Turn the ignition
for the switch OFF and
Bluetooth mod- then to ACC or
ule of this unit. ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.
Appendix
17
En