Samsung WIP-6000M Manual page 31

WIP-6000M User G uide
4.
If the SSID list is displayed on the screen, please
choose one which is written on the product box.
5.
Select the authentication type from between
ASCII and Hex.
6.
Then the phone asks for an authentication
code. Please enter the authentication code
which is written on the product box.
7.
If the entered authentication code is correct,
the phone starts DHCP and asks for a
telephone number. Please enter the phone
number which is assigned the phone.
8.
The phone verifies the phone number you
entered. If the phone number is validated, the
selected SSID, current date and time appear on
the display and you can make or receive a call.
Otherwise, an error message will be displayed
on the screen.
The possible error cases are follows:
Phone number incorrect: The entered phone
Ÿ
number is not a correct number. The phone asks a
phone number input again.
Phone number already assigned: The entered
Ÿ
phone number already assigned to the other phone.
The phone asks a phone number input again.
30