Getting Started; Before To Start - Samsung WIP-6000M Manual

GETTING STARTED

Before to Start

Installation of SMT-W6100 charger
After having decided where to install the charger
see the following instructions:
Put the adapter's jack into the round plug of the charger.
Ÿ
Put the adapter in a 220V plug.
Ÿ
A LED on the charger turns on showing 3 colors: red,
Ÿ
green, orange. Then the LED turns off.
Technical Data
The adapter and the charger have the following
working values:
Adapter
Charger
SMT-W6100 Recharge
In order to recharge the battery of your handset
see the following instructions:
Ÿ Put the handset into the charger.
Ÿ A red LED turns on during the recharge
Ÿ When a green LED turns on the recharge is finished.
If an orange LED turns on it means that the
100/240 VAC, 50/60 Hz
5.0 VDC
5.0 VDC
150 mA
700 mA
700 mA
22