ITEM
Inspector's
Signature
Figure 8B — Recommended Inspector's Report
FIGURE &
COMPONENT
REFERENCE NO.
Figure 19
Load Chain
Ref. No. 8
Figure 18
Gearing
Figure 19
Load Hook Bearing
Ref. No. 18 & 30
Figure 19
Idler Sheave Bearing
Ref. No. 27
(Bushing) Assembly
NOTE: All bearings except hook and idler sheave bearings are prelubricated and sealed.
(*) This lubrication schedule is based on a lifting motor operating in normal environment conditions. Lifting motors operating in
adverse atmospheres containing excessive heat, corrosive fumes or vapors, abrasive dust, etc., should be lubricated more
frequently.
Figure 9 — Recommended Lubrication Schedule
For more information contact: Sievert Crane and Hoist, (708) 771-1600, parts@sievertelectric.com, www.sievertcrane.com
INSPECTOR'S REPORT
REMARKS (LIST DEFICIENCIES AND RECOMMENDED ACTION)
Date
Inspected
Approved by
RECOMMENDED LUBRICATION SCHEDULE*
LIFTING MOTOR
TYPE OF LUBRICANT
(USE ONLY NEW LUBRICANT)
SAE 90 gear oil
SAE 90 extreme pressure (EP) gear oil
SAE 30 gear or motor oil
NLGI #2 multi-purpose
lithium base grease
HEAVY
Daily
At periodic inspection (See Figure 8A)
Weekly
At periodic inspection (See Figure 8A)
15
Country Club Road
P.O. Box 779
Wadesboro, NC 28170 USA
TEL: (800) 477-5003
FAX: (800) 374-6853
Date
TYPE OF SERVICE AND
FREQUENCY OF LUBRICATION
NORMAL
INFREQUENT
Weekly
Monthly
Monthly
Yearly
Need help?
Do you have a question about the Concert Series and is the answer not in the manual?