Remote Controller; Changing The Battery - Telefunken TF-LED32S17T2 Instruction Manual

Remote controller (RC)
1
2
3
TV
4
5
List
6
7
8
Rec
TimeShift
9
10
11
12
1. SOURCE button
2. Number buttons
3. TV button
4. MENU button
5. Cursor (UP/DOWN/LEFT/RIGHT) buttons/
OK button/ZOOM-/ZOOM+ buttons
6. LIST button
7. VOL+/VOL- buttons
8. MUTE button
9. TEXT button
10. SUBTITLE button
11. Red button
13
14
15
16
17
18
19
20
21
22
12. Green button
13. POWER/STANDBY button
14. GUIDE button
15. EXIT button
16. RETURN button
17. INFO button
18. CH+/CH- buttons
19. REC button
20. TimeShift button
21. LANG/Blue button
22. Yellow button

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
1
• Use two AAA batteries for the RC. The RC
should be pointed at remote sensor within 8
meters and within 30 degrees at the left or the
right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
CAUTION!
Incorrect installation of the batteries may
lead to an explosion.
Please replace used batteries with the
batteries of the same or comparable type.
Operation
2 3
7
7