RS485 product 1. INTRODuCTION the RS485 Setting tool is a smart digital system which enables the setting of SoMFY RS485 products (Somfy RS485 motors and interfaces). this was designed to ease the integration and settings for oeMs & façade makers, but also to ease the installation and/or maintenance for installers thanks to fast connection and intuitive tool thanks to its display.
4. WIRING 4.1. Connect the RS485 SETTING TOOL to the RS485 product Between the RS485 Setting tool and the RS485 product, the cable lenght should not exceed 10m. 5. COmmISSIONING BACK 5.1. Switch on the RS485 SETTING TOOL OPEN point to point settings only (this is not a network tool).
Need help?
Do you have a question about the RS485 Setting Tool and is the answer not in the manual?
Questions and answers