Sound Modes - JVC HR-V615EK Instructions Manual

32 advanced features
before you start
Set On Screen Display
(O.S.D.) to ON
( pg. 43)
HR-V615/616/617EK-EN/p29-42
Black
All manuals and user guides at all-guides.com

Sound Modes

NICAM Stereo and Bilingual Broadcasts
This VCR is equipped with a digital stereo sound decoder (
the reception of stereo and bilingual broadcasts possible. When the VCR is tuned
to a different preset, the type of broadcast will be displayed on the TV screen for
a few seconds.
Press
AUDIO
select stereo
Press
select bilingual
screen (as required).
To listen to standard monaural audio during a NICAM
select standard
broadcast, press AUDIO until
Soundtrack Selection
This VCR is capable of recording three soundtracks and will play back the one
that you select with the
AUDIO
track use
HI FI
Hi-Fi stereo pre-recorded tapes
L l L R
HI FI
Main audio of bilingual tapes
L l
HI FI
Sub-audio of bilingual tapes
L R
Audio-dubbed tapes
NORM
HI FI
Audio-dubbed tapes
NORM
Notes
normal selection hi fi l
Hi-Fi stereo tapes are played back in stereo and the normal audio track is played
back automatically for tapes which only have normal audio.
If the NICAM stereo signal is poor or unavailable, the VCR will
recording
automatically record standard monoaural audio onto both the Hi-Fi and normal
audio tracks. This will eliminate possible audio interference.
32
until appears on the TV screen.
HIFI L l L R
until l or
AUDIO HIFI L HIFI
NORM appears on the TV screen.
button.
l L r should normally be selected. In this mode,
3/8/04, 10:18 AM
) which makes
NICAM
appears on the TV
L R