JVC HR-V615EK Instructions Manual page 11

before you start
Check that the VCR is
turned off and no
cassette is inserted
Load the batterys into
the Remote Control
Refer to the Remote
Control diagram
on pages 6–7
Unless indicated
otherwise, use the
buttons on the Remote
Control
Check that the
connection is completed
Be sure to use the fully-
wired 21-pin SCART cable
Turn on the TV whose
channels have already
been stored
– –:– –
HR-V615/616/617EK-EN/p08-12
Black
All manuals and user guides at all-guides.com
FINISH AUTO SETUP
Press OK button and move on to
If there is a power cut or you accidentally press a button during
oops!
, turn the VCR off and then on again. Re-perform
Setup
Preset Download
START PRESET DOWNLOAD
Press the o button. The display panel on the
front of the VCR will show the word 'Auto'.
Press the PR and PR
'CH – –' and press OK button (or
The VCR is automati-
what will happen?
cally setting up the tuner channels by down-
loading from your TV, clock and the VIDEO
Plus+ system assigned Guide Program num-
bers. During downloading, preset position on
the display panel increases from "CH
rf and scart connection
manual), you will see the following information displayed on your TV screen:
T-V LINK
PLEASE WAIT
[MENU]: EXIT
SET THE VIDEO CHANNEL TO OFF
When has finished, 'COM-
Preset Download
PLETED' appears on the TV screen. Press o to
turn off the VCR. Press and hold down S on
the VCR until you will see the display on the
right. Press PR - - on the Remote Control until the figure reads '– –'.
FINISH PRESET DOWNLOAD
Press OK button and move on to
If there is a power cut or you accidentally press a button during
oops!
Download, turn the VCR off and then on again. Re-perform
NOTES
• In areas where no TV station transmits the PDC signal, the VCR cannot setup
either the clock or Guide Program numbers.
• On this VCR, the characters available for station names (ID) are A–Z, 0–9, –,
*
, + and (space). The names of some downloaded stations may differ from
those on your TV.
11
three step quick start
Step 2 to check the results.
button to select
).
Preset Download is running:
don't touch any buttons
1
".
If the TV set is in its AV mode (see the TV
Your TV screen during Preset
Download
to check the results.
Step 2
3/8/04, 10:07 AM
11
Auto
.
Auto Setup
SAT
VCR
REVIEW
SAT
VCR
REVIEW
SAT
VCR
REVIEW
reset
P
reset Download.
P