The B.e.s.t. Picture System - JVC HR-V615EK Instructions Manual

about b.e.s.t.
Works in SP and LP
modes
Does not work with
Auto Satellite Prog
Recording
Works before Timer
Recording
B.E.S.T. data is lost
when tape is ejected
Pressing the T button on
VCR does not start Instant
Timer Recording while
B.E.S.T. is turned ON
Recording and Playback Using B.E.S.T.
recording
VCR spends about 7 seconds assessing the condition of the tape and then begins recording.
During B.E.S.T.
Press .. The VCR adjusts the playback picture quality
playback
based on the condition of the tape in use. B.E.S.T. is active during
Auto Tracking.
Avoiding B.E.S.T. Time Delay
Since B.E.S.T. introduces a 7 second delay before recording starts, you may wish to compensate by
first pressing | and T together (this puts the VCR into
the VCR performs the B.E.S.T. tape assessment) and then pressing . when you wish to start
recording.
HR-V615/616/617EK-EN/p29-42
Black
All manuals and user guides at all-guides.com
The B.E.S.T.
Picture System
The Biconditional Equalised Signal Tracking (B.E.S.T.) System checks the
condition of the tape in use and compensates during recording and playback
to give the best picture quality possible. The default setting is ON.
Turning B.E.S.T. ON or OFF
get to the mode set screen
button . Move the highlight bar to
using the PR and PR
OK button (or ).
Move the highlight bar to
select b.e.s.t. mode
B.E.S.T. using the PR and PR
press OK button (or
.
OFF
return to normal screen
Press and hold T and press . on the Remote Control (or press T on the VCR). The
SAT
a
pause of 7 seconds
VCR
REVIEW
appears on the VCR's display panel.
bESt
31
advanced features
Press MENU
MODE SET
buttons and press
buttons and
) to set or
B.E.S.T. ON
Press MENU button.
a
B.E.S.T. complete
RECORD PAUSE
3/8/04, 10:18 AM
MODE SET
F B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE ON
AUTO POWER OFF OFF
[1] a k
[MENU]: EXIT
SAT
VCR
REVIEW
SAT
VCR
REVIEW
mode during which time
31