Video Plus + Timer Programming - JVC HR-V615EK Instructions Manual

before you start
Make sure that the
VCR's clock is set
correctly
Insert a cassette with
the safety tab in place
Turn on the TV and
select the Video channel
or the AV Mode
HR-V615/616/617EK-EN/p21-28
Black
All manuals and user guides at all-guides.com
VIDEO Plus +
Timer Programming
The VIDEO Plus+ system uses the code numbers – called PlusCode numbers
– printed after each programme in your TV listings guide. These are a kind of
shorthand for video recorders and using them automatically sets your VCR
to record the correct programme, channel and time.
The VIDEO Plus+ Deluxe system enables a VCR to automatically control
satellite channels through a satellite receiver using an optional Satellite
Controller ( pg. 36).
Get to the VIDEO Plus + Screen
PLUSCODE NO.
[0–9] a VIDEO PLUS+ PROG
[PROG] : EXIT
Enter the PlusCode Number
PLUSCODE NO.
5 6 7 8 1 2 3 4
[0–9] a k
[x]: DELETE
[PROG]: EXIT
21
®
Press PROG. Press 1 to place the pointer next to
"VIDEO PLUS+", then press OK. The PLUSCODE
NO. screen appears.
Press the number keys on the Remote Control to
enter the PlusCode number of the programme you
wish to record. If you make a mistake, press x to
delete the incorrect number and then enter the
correct one.
3/12/04, 10:52 AM
basic features 21