Ingrasys Skywalk iSC-NVR5316-T User Manual page 48

(3) It will start adding the new HDD into the RAID configuration.
(4) It will pop up a dialog box "It is complete! Please, press OK and the system will reboot."
after "RAID Processing 100%". Click OK button to reboot system and the process is
complete.
Note 1: If you want to re-configure the RAID type, you can power off system -> plug out all
HDD chassis -> plug in HDD chassis -> power on system to reset the system including RAID
configuration. All of the configuration and data will disappear.
Note 2: It can only add 2 pcs of HDD one time on hardware RAID 1 (original 2 pcs) and the RAID
configuration will turn to RAID 10 automatically. However, the UI still show RAID 1. Once
you want to add more HDDs later, you have to add 4* of HDDs.
47