Ingrasys Skywalk iSC-NVR5316-T User Manual page 42

(4) You can expand capacity and add new HDD by Settings -> Storage >> Disk Management
on local display. To avoid RAID configuration error, you should prevent the system
from powering off or restart during the process of expanding or adding HDD. The
rebuild time of RAID configuration depends on the amount of data stored in RAID.
(Refer to Chapter 3.6 and 3.7 for detail.)
Here are some circumstances of HDDs for your reference:
(A) Disk is Not installed.
(B) Disk is installed and normal.
Moreover, it is Not on the current RAID configuration.
(C) Disk is installed but abnormal.
(D) Disk is on the current RAID configuration and it is normal.
(E) Disk is on the current RAID configuration but it is abnormal.
(F) [On click] selected disk
41