Ingrasys Skywalk iSC-NVR5316-T User Manual page 32

Device Tree List:
(A) Skywalk NVR, it displays the host name of Skywalk NVR behind the icon. The
host name can be modified via Settings -> System >> General -> NVR
Information -> NVR name.
(B) Disconnected, camera disconnected by some reasons. You may check
connection settings to reconnect to it.
(C) Recording, camera streaming is recording to Skywalk NVR.
(D) Recording Stops but Previewing is running, camera does not enable
recording but it is under previewing.
(E) Recording Stops and Previewing is not running, camera does not enable
recording and not under previewing.
(F) Event alert, this icon shows up while new event occurs. It will disappear
when users click it and the latest 5 events will pop up in the window of Event
Quick View. Then it will show up again during the latest 5 events popped
up when new event occurs.
(G) Device Management, clicking this icon pops up the device management
window for setting up General, Video, Record, Motion, DI/DO, Event and
Advance. (Refer to SClient Chapter 7.5 for detail.)
General Function of Live View: General functions include Device Manager, Buzzer off,
Volume, Sequence, PTZ, Video Ratio, Full Screen, Cancel All Preview, Upload to Internet,
Data export, Gallery, Broadcast and Display Layout. Please refer to the following for detail:
(A) Device Manager button, you can click the button to add and delete IP
cameras. (Refer to Chapter 3.2 for detail.)
(B) Buzzer off button, you can set system alarm threshold (refer to Chapter
3.5.1 for detail) to alarm with buzzer on Skywalk NVR and then click the
Buzzer off button to mute this sound after noticing the alarm.
(C) Volume button, you can adjust the volume of the audio output of displaying
channel on local display by scrolling the roller of mouse.
31