Ingrasys Skywalk iSC-NVR5316-T User Manual page 29

Note 1: Please make sure the Port and Password are as same as the settings of IP camera.
You can edit them if the value is wrong and unable to Preview the image of IP camera.
Note 2: Do not forget to input the Device Name for adding IP cameras.
Note 3: Default HTTP port is 80 (range of setting value: 1~65535), the allowed maximum
characters for Device Name are 24.
(4) You can also add camera one by one manually. Click Manual button and it will pop up
a window of Manual add a Device. Input detail information of your IP camera such as
Vendor, Model, Account, Password, IP Address, Port and then click Add button to
complete adding cameras. You can also manually add a RTSP stream by selecting
General_RTSP as Vendor and input related information.
Note: Default HTTP port is 80 (range of setting value: 1~65535), HTTPs port is 443 (range of
setting value: 1~65525).
(5) Click button to exit the Device Management after adding camera successfully.
(6) Move mouse cursor to the IP cameras and click the settings icon to launch the Device
Settings. The settings are similar to SClient (refer to Chapter 7.5 for detail).
28