Ingrasys Skywalk iSC-NVR5316-T User Manual page 35

(A) ePTZ button, clicking this button and scrolling mouse wheel to zoom in or
zoom out; holding left button of mouse to control Pan and Tilt.
(B) Audio button, you can click Audio button to enable/disable the audio output.
Note 1: Please make sure you have audio recording on the channel.
Note 2: iSC-NVR5316-T has No audio jack: Mic-in, Line-in and Line-out. Therefore,
there is No audio output through local display after clicking the audio button.
(C) Two-way Audio button, clicking this button to start two-way audio on the
selected channel
Note: Please make sure your IP camera supports two-way audio.
(D) Manual Snapshot button, clicking this button can take a snapshot of current
video and save the file in the folder of Skywalk NVR. You can click the Gallery
button
(E) Manual Record Enable/Disable button, you can manually start recording for
the channel. You can enable recording manually even the selected channel
did not set any recording schedule.
(F) Manual Event button, you can manually trigger an event.
(G) Instant Playback button, Skywalk NVR allows you to playback instantly. You
may slide the time bar to left for backward and right for forward.
(H) Close button, you can click this button to disconnect the displaying channel.
System Function: It shows the infomration of current user and the version of Skywalk NVR.
(A) Login account, displaying the name of current user
(B) Help button, it shows the information of Skywalk NVR Firmware version,
vendor and Contact Us.
to check the snapshots you have taken.
34