Ingrasys Skywalk iSC-NVR5316-T User Manual page 14

(3) Insert the HDD tray back to the chassis and make sure the lever of the chassis is
properly in place.
(4) Connect one end of your network cable to the network connector of Skywalk NVR and
the other end of network cable to your Ethernet switch.
(5) Connect USB keyboard and mouse to rear side.
(6) Connect a Monitor to VGA interface for Basic Settings of local Server (refer to Chapter
3.1 for detail).
(7) Plug one end of the power cord to the power connector and the other end of power
cord connect to the power source.
(8) Open the front cover (to enable power button) and then push the power button to
power on Skywalk NVR.
(9) You will be able to access Skywalk NVR via network after the LCM shows "System
Ready". The following sections will show you how to connect and login to the
Skywalk NVR.
13