Note 4: The action of "Push Notify" is used for mobile devices-SViewer. To activate the action,
you should ever logged in NVR on SViewer successfully, do NOT forget to turn ON the
Notification & Sounds in mobile Settings and the NVR and mobile devices should connect
to Internet.
(4)
You may configure the Schedule button to enable the actions by schedule (refer to
Chapter 7.7.4) then click OK button to save the settings. The default setting of
schedule is full. You can adjust the schedule by dragging the edge of time bar.
Note: Do not forget to click
OK
button to save the settings.
105