Configuration Setup Menu - Behringer FCB1010 User Manual

6ZLWFK )XQFWLRQ
Determines if UP key toggles
1 SWITCH 1 SWITCH 1 relay while DIRECT
Determines if DOWN key toggles
2 SWITCH 2 SWITCH 2 relay while DIRECT
COPY Enables copying presets (see ch.
5
PRESET
SYSEX Sends the entire memory as a sysex
6
SEND
When this switch is pressed, the
FCB1010 waits for the reception of
SYSEX
7 system-exclusive data. Switch LED
RCV
dies out when the data have been
Allows to merge MIDI IN data with
FCB1010-generated data. The
8 MERGE
subsequently output at the MIDI
Enables/disables running status
feature. Serves to make efficient use
RUNNING of the MIDI transmission rate. The
9
STATUS MIDI status byte from the expression
pedals is sent only if it differs from
+
$FWLRQ
SELECT is enabled.
SELECT is enabled.
2.4.1).
dump.
received correctly.
combined data stream is
OUT.
the preceding status byte.
s
s
s
+
s
s
Tv‡pu HD9DÃsˆp‡v‚
1 PRG CHG 1
2 PRG CHG 2
3 PRG CHG 3
4 PRG CHG 4
5 PRG CHG 5
6 CNT 1
7 CNT 2
8 EXP A
9 EXP B
10/0 NOTE
+
s
s
s
6p‡v‚
Program change command #1
Program change command #2
Program change command #3
Program change command #4
Program change command #5
Controller 1
Controller 2
Expression Pedal A
Expression Pedal B
Transmits a MIDI note