If liquid is spilled inside the unit, disconnect it from the mains and have it checked by a competent person. DURING OPERATION Do not use rotors with visible signs of corrosion, wear or mechanical damage. Version 2.02 - October 2012 Centrifuge/vortex Multi-Spin PCV-6000 Page 4 Operating Instructions...
Page 5
Do not make modifications to the design of the unit. BIOLOGICAL SAFETY It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on or inside the equipment. Centrifuge/vortex Multi-Spin PCV-6000 Version 2.02 - October 2012 Page 5 Operating Instructions...
15 min 10 min Table 1. Comparison of PCV-4200, PCV-3000 and PCV-6000 PCR reaction preparation times have traditionally been lengthy, the Multi-Spin reduces this time. Trying to achieve the same sms algorithm manually is around ten times slower (up to 30 min for 100...
Page 7
Preparing a sample before loading in to a gel for electrophoresis; Magnetic beads technology. Lid lock when centrifuge is running provides safe operation. The external power supply unit ensures the electrical safety of the Multi-Spin. Centrifuge/vortex Multi-Spin PCV-6000 Version 2.02 - October 2012 Page 7 Operating Instructions...
Remove packaging carefully, and retain for future shipment or storage of the unit. 3.2. Complete set. The unit set includes: Standard set: Centrifuge/Vortex Multi-Spin PCV-6000..............1 pce. External power supply....................1 pce. Rotor fixation pin ......................1 pce. rotor 18091 u ......................1 pce.
Page 9
). Hold the rotor with one hand and turn the fixation head (using the pin as a lever) counter clockwise to set rotor free. Change the rotor and fix it properly putting back the fixation head. Fig.1 Rotor replacement Centrifuge/vortex Multi-Spin PCV-6000 Version 2.02 - October 2012 Page 9 Operating Instructions...
The program can also be changed during the operation - microprocessor automatically enters the last changes into the memory as the working program when the new cycle begins. Version 2.02 - October 2012 Centrifuge/vortex Multi-Spin PCV-6000 Page 10 Operating Instructions...
Page 11
4.15.3. Insert a small screwdriver, or similar tool (with diameter up to 3 mm) into the emergency opening slot at 15 mm depth and move the lever from the left to the right side with one hand and simultaneously with another hand open the lid. Centrifuge/vortex Multi-Spin PCV-6000 Version 2.02 - October 2012 Page 11...
18092 for 12 x 0.5 + 12 x 0.2 ml microtest tubes Grant is committed to a continuous programme of improvement, specifications may be changed without notice. Version 2.02 - October 2012 Centrifuge/vortex Multi-Spin PCV-6000 Page 12 Operating Instructions...
UK or in other countries,our distributor. 6.3. Cleaning & Disinfection Standard ethanol (75%) or other cleaning agents recommended for cleaning of laboratory equipment can be used for cleaning and disinfection of the unit. Centrifuge/vortex Multi-Spin PCV-6000 Version 2.02 - October 2012 Operating Instructions Page 13...
Need help?
Do you have a question about the PCV-6000 and is the answer not in the manual?
Questions and answers