Back Panel - Rocktron Valve Sonic Plexi User Manual

Back Panel

1
POWER "MAINS" INPUT Plug:
Use the supplied power cable to provide power to the ValveSonic. See point
2 to make sure you have set the proper voltage for the area of the world you
are using the ValveSonic.
2 POWER 110V-240V SELECTOR Switch:
You must select the proper voltage to run the unit. Please check the specified
voltage for your area and move the switch to that voltage before powering
up the unit. Note that selecting the wrong voltage can damage the unit and
void the warranty.
3
LINE OUTPUT jack:
This standard 1/4"mono jack provides a LINE LEVEL OUTPUT signal of
the VALVESONIC, which can be fed to an amplifier or other effects.
4
INSTRUMENT OUTPUT jack:
This standard 1/4"mono jack provides a INSTRUMENT LEVEL OUTPUT
signal of the VALVESONIC, which can be fed to an amplifier or other effects.
5
INPUT jack:
This standard 1/4" mono jack provides an input to the VALVESONIC from
a guitar or other effect.