Compaq 802.11b MultiPort Installation Manual page 20

Problem
I cannot connect to one of
the users in the network.
Installation Guide
Solving Problems (Continued)
Solution
I
Make sure each network client is up and
running with a green taskbar icon.
I
Make sure your WEP settings are correct.
I
Move your computer closer to the access
point or other network client.
I
Make sure the network client you need to
reach is within range, or within range of
an access point.
I
Make sure the network settings are
correct for your local area network.
I
The MultiPort Module is not enabled.
Press
Module.
Contact your network administrator for other
networking issues.
Fn+F2
to enable the MultiPort
Troubleshooting
A–3