Gardena EasyCut Li-18/23 R Operating Instructions Manual page 8

Setting the trimmer to body
height:
h
o
1
t
Adjusting the plant guard:
Starting the trimmer:
p
a
5. Storage
To put into storage:
20
Setting the shaft length:
v Loosen the clamping sleeve
desired shaft length and re-tighten the threaded collar
t
The clamping sleeve
prevent the shaft from being moved.
Setting the additional handle:
o
v Pull the lock belonging to the additional handle
set the additional handle
o
release the lock .
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in working position 1 is tilted
forwards slightly.
v Hold the trimmer by the handle
such a manner that the trimmer head is tilted forwards slightly.
ö
Working position
ö
v Turn plant guard
until it locks into place.
Switching the trimmer on:
1. Press and hold the safety lock
a
button on the handle.
2. Release the safety lock
Switching the trimmer off:
v Release the start button
The product must be stored away from children.
1. Charge battery.
2. Store your Turbotrimmer in a dry place where it is protected
from frost.
Recommendation:
The trimmer can be suspended by the handle.
The trimmer head is not placed upon any unnecessary
strain if stored in a suspended manner.
t
, extend the handle
must be fastened firmly enough to
h
to the desired incline and
1
and additional handle
ö
Parking position
through 90° into the required position
p
and then press the start
p
again.
a
on the handle.
1
to the
t
.
h
,
h
in