Rfid Tag; Stackwise Ports; Power Supply Modules - Cisco C9200L-48P-4G Installation Manual

RFID Tag

RFID Tag
The switch has a built-in, front-facing, passive RFID tag that uses UHF RFID technology and requires an
RFID reader with compatible software. It provides auto-identification capabilities for asset management and
tracking. The RFID tags are compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C
compliant. They operate in the 860- to 960-MHz UHF band. For more information, see
Identification (RFID) on Cisco Catalyst 9000 Family Switches White

StackWise Ports

StackWise ports are used to connect switches in StackWise stacking configurations. The switch ships with a
0.5-meter StackWise cable that you can use to connect the StackWise ports. For more information on StackWise
cables, see
Caution Use only approved cables, and connect only to similar Cisco equipment. Equipment might be damaged if
connected to nonapproved Cisco cables or equipment.

Power Supply Modules

The switch has a field replaceable main AC power supply module and a redundant hot-swappable field
replaceable AC power supply module. The switch is powered through one or two internal power supply
modules. In switches with PoE capability, the redundant power supply can also be used for extra PoE power.
Following are the power supply modules supported on Cisco Catalyst 9200 Series Switches:
• PWR-C5-125WAC
• PWR-C5-600WAC
• PWR-C5-1KWAC
The switch has two internal power supply module slots. You can use two AC power supply modules or one
power supply module and a blank module (PWR-C5-BLANK).
The switch can operate with either one or two active power supply modules.
Switch Models, on page 1
power supply modules (except the blank modules) have internal fans. All switches ship with a blank power
supply module in the second power supply slot. Each AC power supply module has a power cord
(CAB-TA-XXX) for connection to an AC power outlet.
Caution
Do not operate the switch with one power supply module slot empty. For proper chassis cooling, both power
supply module slots must be populated with either a power supply or a blank module.
The power supply modules are autoranging units that support input voltages between 100 and 240 VAC. The
output voltage range is 12 to 12.5 V for 125W power supply and 54 to 56 V for 600W and 1000W power
supplies.
All the PoE-enable switches when installed with both the power supplies support full PoE+; 1440W on a
48-port switch and 740W on a 24-port switch.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
8
Connecting to the StackWise Ports, on page
shows the default power supply modules that ship with each switch model. All
Paper.
25.
Product Overview
Radio Frequency