Entrust Datacard CR825 Quick Install Manual page 14

CR825 Instant Issuance System
4. Press the cartridge release button at the top of the
b
cartridge and open the cartridge door.
5. Lift the card weight to the top of the cartridge and pull
it forward until it locks in position.
6. Load the cards into the cartridge.
7. Close the cartridge door to release the card weight so
that it rests on top of the cards.
4
Card Weight
8. Repeat for each input hopper cartridge.
9. Return all locks to the locked position when finished.
24
5
6
Cards
527749-001EN_E
13
Connect the Network Data Cable
527749-001EN_E
Quick Install Guide
25