Advertisement
Close
Always close the connection through the application on your computer. See the software user's
guide for more help. Your phone will return to the idle display.
Note: To place or receive calls when the data cable is connected between your phone and
computer, move the VOICE/DATA switch to VOICE.
During the data call
Reading the display
Once the call is successfully connected, your phone's display shows transmission information.
[Time elapsed
Connection speed
Type of call
Connection number
Rate for sending
Rate for receiving]
Accessing features
While connected on a data call, you can still access most of your phone's features. You can
navigate the phone's menu system to change or view your phone's features or phone book
entries or read messages or Caller IDs that you received before placing the call.
Setting up Pre-arrangement
Some networks require you to change a setting on your phone before you can receive an
incoming fax or data call. This is called pre-arrangement. There is no need to worry about
placing data or fax calls – the pre-arrangement setting only applies to receiving calls.
Keep in mind: In pre-arrangement mode, you will not be able to receive incoming voice calls.
1.
Enter Menu
Press [FCN] then [MENU] to enter the menu.
2.
Select submenu
Press [↑] or [↓] to scroll to: Phone options, and press [MENU] to select.
3.
Select feature
Press [↑] or [↓] to scroll to: Data set up, and press [MENU] to select.
4.
Select settings
Press [↑] or [↓] to scroll to: Voice only, Incoming fax, Incoming data, or to Main menu,
and press [MENU] to select. If you select a fax or data setting you will see: No Incoming
Voice Calls.
Exit menu. Press [END] to exit the menu. You will see: Data Ready, or Fax Ready.
Your phone will automatically return to Voice Only mode if you remove the cable, turn OFF the
phone, shut down your computer, or move the VOICE/DATA switch to the VOICE position.
CMR2100 UM.doc
76/78
Advertisement
