Advertisement
Press [↑] or [↓] to scroll to the name you are looking for and press [MENU] to select.
3.
Select number
Press [↑] or [↓] to scroll to the number you want to make the dialing shortcut for that
location and press [STO] to select. You will see: Edit number.
4.
Select SET
Press [CLR]. You will see: Set speed dial. Press [STO] to select.
5.
Set
Press [STO] to set that number as the dialing shortcut. You will see: Set.
Scratchpad
If you need to take a quick note but you do not want to save the number, use the scratchpad. The
scratchpad is useful if you are on the phone and your party gives you another number to call.
1.
Enter number
Enter the number with the keypad. (The person on the line will hear tones as you dial.)
2.
Store number
Press [STO] and continue with step 3 on page ____.
or End call
Press [END] to end you current call if necessary.
and Place call
Press [SEND] to call the number in the scratchpad.
Pause dialing
Your cellular phone is equipped with tone dialing used for accessing voice systems, operating
answering machines, etc. In general these services are performed in two parts: The number is
first dialed from the memory location or using the keypad, and after hearing the reply the
remaining digits are sent. Pause dialing can make using automated systems easy by allowing
you to store these numbers in the same memory location as the automated system's access
number. Separate each set of numbers with a "pause" – a special character that tells your phone
to wait before sending additional numbers.
In order to use pause dialing, recall the number from the memory location, and press and hole
the smart button, or press [SEND] to dial. Listen for the automated message requesting you to
enter the next group of digits. Press the smart button or [SEND] in order to send the next group
of digits. Repeat this procedure as many times as is necessary to send all the digits.
Storing a number with pulse dialing
1.
Enter number
Enter the phone number you use to access the automated system.
2.
Insert pause
Press [FCN] and then [SEND]. You will see: Insert Pause o. Press [MENU]. You will see
a pause circle o inserted into the number entry.
CMR2100 UM.doc
25/78
Advertisement
