Advertisement
Press [CLR] or [END] to clear the display, and you can begin placing calls again.
Call Waiting
If you subscribe to Call Waiting through your service provider, you may hear a tone while on a
call, indicating that you are receiving a second call.
Press [SEND] to answer the call and automatically place the current call on hold.
----------------------------
Redialing
Auto redial
The wireless system may at times be too busy to handle your call. If this is the case, you may
hear a fast busy signal. With Automatic Redial, your phone will repeat the call attempt over the
next four minutes. A single ring will indicate renewal of telecommunications.
Note: This feature is not intended for redialing in the case of a regular busy signal. In such a
case you should hang up and redial.
1.
Press [MENU] or [SEND] on hearing a fast busy signal.
You will see: Redialing
If the 4 minutes were not enough:
2.
Press [MENU] or [SEND] to renew attempts for automatic redialing.
You will see: Press SND for redialing.
Redial
If you hear an ordinary busy signal, do the following:
1.
Press [END] to hang up.
2.
Press [MENU] or [SEND] to redial the last number.
(*** indicates the number being dialed).
You can also program the phone for automatic redialing without having to push a button, by
turning on Auto Redial.
Tip:
Your phone's scratchpad automatically remembers the last number entered. See page __
.
----------------------------
Redialing
Display last ten numbers dialed.
CMR2100 UM.doc
17/78
Advertisement
