Led Indicators - TP-Link Archer VR900 Installation Manual

Con guring the Modem Router
1.
Connecting your computer to the modem router (Wired
or Wireless)
Wired
Connect a computer to the modem router and the LAN LED
Ethernet cable
Wireless
Connect wirelessly by using the SSID (network name) and Wireless Password printed on the
product label at the back of the modem router.
2. Con guring the modem router via a web browser
A Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a new password (1-15 characters) and click Save.
Note: If the login page does not appear, please refer to FAQ->Q1.
http://tplinkmodem.net
New Password
Low Middle High
Confirm Password
Save
Enter the new password that you created and click Login.
B
Note: For subsequent logins, use your password you have created.
Select your Region and Time Zone, then click Next.
C
Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region only.
Region:
United Kingdom
Time Zone:
(GMT) Greenwich Mean Time: Dublin, Edingburgh, London, Lisbon
Select your ISP from the ISP List or select Other if you can't nd your ISP, then
D
click Next. Follow the step-by-step instructions of the Quick Setup to complete
the initial con guration.
Note: For advanced settings, please refer to the User Guide on TP-LINK official website at www.tp-link.com.
USB Features
Use the USB ports for media sharing, storage sharing and printer sharing across your
local network. You can also setup an FTP server to access your files remotely through
the Internet.
lights up.
V
USB Ports
Local Storage
Sharing
The USB port can also be used for 3G/4G Modem Sharing. Insert the 3G/4G USB modem
with a SIM/UIM card into one of the USB port and start sharing your 3G/4G Internet with
multiple devices.

LED Indicators

LED
(Power)
(VDSL/ADSL)
(Internet)
(Wireless 2.4G)
(Wireless 5G)
(LAN)
Next
(USB)
(WPS)
/ A
To learn more about the USB features, visit
http://tp-link.com/app/usb or simply scan
the QR code.
Remote Access
Printer Sharing
via FTP Server
Status Indication
On System initialization complete.
Flash System initializing or firmware upgrading is in process. Do not
disconnect or power off the modem router.
Off Power is off.
On DSL line is synchronized and ready to use.
Flash The DSL negotiation is in progress.
Off DSL synchronization failed.
On Internet connection is available.
Off No Internet connection or the modem router is operating in Bridge mode.
On The wireless 2.4GHz band is enabled.
Off The wireless 2.4GHz band is disabled.
On The wireless 5GHz band is enabled.
Off
The wireless 5GHz band is disabled.
On At least one LAN port is connected.
Off No LAN port is connected.
On The USB device is identified and ready to use.
Flashing
The USB device is being identified.
Off No USB device is plugged into the USB port.
On/Off Turns On when a WPS synchronization is established and automatically
turns Off about five minutes later.
A wireless device is trying to connect to the network via WPS. This process
Slow Flashing
may take up to 2 minutes.
FAQ (Frequently Asked Questions)
Q1. What can I do if the login page does not appear?
A1. If the computer is set to a static or fixed IP address, change it to obtain an IP address
automatically from the modem router.
A2. Verify http://tplinkmodem.net or 192.168.1.1 is correctly entered in the web browser
and press Enter.
A3. Use another web browser and try again.
A4. Reboot your modem router and try again.
A5. Disable and enable the active network adapter.
Q2. What can I do if I cannot access the Internet?
A1. Make sure the telephone and Ethernet cables are plugged in correctly.
A2. Try to log into the web management page of the modem router using the default
address at http://tplinkmodem.net or 192.168.1.1. If you can, try the following
answers. If you cannot, change your computer to obtain an IP address automatically
from the modem router.
A3. Consult your ISP and make sure all the VPI/VCI (or VLAN ID), Connection Type, account
username and password are correct. If they are not, please replace them with the correct
settings and try again.
A4. Restore the modem router to its factory default settings and reconfigure the modem
router by following the instructions in this Quick Installation Guide.
A5. Please contact our Technical Support if the problem still exists.
Q3. How do I restore the modem router to its factory default
settings?
A1. With the modem router powered on,
press and hold down the RESET button
Media Sharing
on the back panel of the modem
router for 8 seconds until all LEDs turn
back on momentarily, then release the
button.
A2. Log in Web Management page of the modem router, and go to Advanced > System
Tools > Backup & Restore, click Factory Restore and wait until the reset process is
complete.
Q4. What can I do if I forget my password?
Web Management page password:
Restore the modem router to its factory default settings and then set a new password using
1-15 characters.
Wireless Network password:
A1. The default Wireless Password/PIN is printed on the product label of the modem router.
A2. If the default wireless password has been changed, log into the modem router's web
management page and go to Basic > Wireless to retrieve or reset your password.
Q5. What can I do if the DSL LED
A1. Check your cables and make sure they are all plugged in correctly, including the
telephone lines and power adapter.
A2. Manually change your DSL settings. Log into the modem router's web management page,
and go to Advanced > Network > DSL Settings. If you were in ADSL Mode, change the
DSL Modulation Type to ADSL Auto Sync-up. If you were not sure in which mode, change
to Auto Sync-up. Then click Save. You will be prompted a disconnection, and click YES to
continue.
A3. Restore your modem router to its factory default settings.
A4. Remove the DSL splitter, directly connect the modem router to the phone jack and then
reconfigure the modem router by following the instructions in this Quick Installation
Guide.
A5. Contact your ISP to verify if the DSL line is in good status.
A6. If you have tried all the suggestions above and the problem still exists, contact our
Technical Support.
V / A
RESET Button Press & Hold for 8 seconds
does not turn solid on?
©2015 TP-LINK