Floor Monitor - Electro-Voice ZLX Series Installation Manual

ZLX Powered Loudspeaker Series
Mounting a loudspeaker on a pole
Caution!
Two person lift and placement is recommended for the heavier loudspeakers. Single person
!
lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a pole, do the following:
1.
2.
3.
4.
5.
3.2

Floor monitor

ZLX-12BT and ZLX-15BT loudspeakers may be used as a floor monitor by placing the
loudspeaker on the integral monitor angle.
Setting up as a floor monitor
To set up a loudspeaker as a floor monitor, do the following:
1.
2.
Notice!
Secure cables with wire ties or tape whenever possible.
Electro-Voice
Place the subwoofer on a level stable surface.
Insert the pole into the pole cup on the top of the subwoofer.
If you are using a threaded pole mount, turn the pole clockwise to secure the pole to the
subwoofer.
OR
If you are not using a threaded pole mount, continue to the next step.
Using two hands lift the loudspeaker.
Set the pole cup located on the bottom of the loudspeaker onto the pole.
Place the loudspeaker on a level and stable surface.
Safely route cables to prevent injury to performers, production crew, and audience
members.
Tripod, pole mount, and floor monitor operation | en
Installation manual
13
2018.04 | 01 | F.01U.349.854