Electro-Voice ZLX Series Installation Manual page 23

ZLX Powered Loudspeaker Series
The default is OFF.
RESET Menu
The Reset menu is used to reset the loudspeaker to original factory settings. Available options
for this selection are: NO or YES.
The default is NO.
To reset the system to original factory settings, do the following:
1.
2.
Notice!
Performing a reset erases the user customized settings saved under the STORE menu.
The five user customized settings in the STORE and RECALL menus return to <EMPTY>.
INFO Menu
The Information menu is used to display the product name and firmware version.
Electro-Voice
From the DSP menu, select RESET.
The reset are you sure message appears.
Select YES.
The loudspeaker restarts and resets the system to the original factory settings.
Installation manual
Amplifier DSP | en 23
2018.04 | 01 | F.01U.349.854