Specifications; Instrument; Batteries - Industrial Scientific Radius BZ1 Product Manual

Specifications

Instrument

The Radius BZ1 takes gas readings every second and records readings-related data at its settable interval.
Data are stored in the instrument data log, which has these characteristics:
• Capacity for approximately 90 days of data for a unit that has six installed sensors and is set to record
data every ten seconds.
• Data storage for up to 60 alarm events, 30 error events, and 250 manual calibrations and bump tests.
Additional instrument specifications are provided below.
Table 2.3 Instrument specifications
Item
Display
User interface buttons
Alarms
a
Dimensions
Weight
Ingress protection
Pump
Operating temperature range
Operating humidity range
b
Storage temperature range
Pressure range
May vary based on in-field conditions.
a
Sensor temperature and humidity ranges may differ from those of the instrument (see "Table 2.5 Sensor specifications").
b
Maximum storage duration is based on the temperature of the storage environment (see "Table 1.7 Storage temperature and duration for a fully charged unit").
c

Batteries

Provided below are battery specifications, which include run time, charge time, charging temperature
requirements, and expected lifetime.
Table 2.4 Battery specifications
Battery type
Battery lifetime
Run time
a
Battery charge time
Description
11.2 cm (4.4 ") monochrome LCD
Three: power button, left button, and right button
Visual: red and blue LEDs
Audible: 108 dB at a distance of 1m (3.3 ')
29 x 29 x 55 cm (11.5 x 11.5 x 21.5 ")
7.5 kg (16.5 lb)
IP66
With 0.3175 cm (0.125 ") inside diameter sample tubing, sustains a continuous sample
draw for up to 30.48 m (100 ')
-20 °C to +55 °C (-4 °F to +131 °F)
b
15−95% relative humidity (RH) noncondensing (continuous)
-20 °C to +55 °C (-4 °F to +131 °F)
c
1 atm ± 0.2 atm
Radius Base battery
pack
Nickel Metal Hydride
2 years
168 hours
Less than 8 hours
Battery
SafeCore Module battery
Lithium Thionyl Chloride (Li-SOCl
16
)
2
2+ years
c
—
—