Advertisement
CARPET
PREPARATION
OPERATION
For best results prepare carpet for cleaning as follows:
1. Vacuum carpet 11o remove loose dirt before using Cleaner.
2. To remove stains and ground in dirt present in heavy traffic
areas of the carpet, spray or rub Sears Heavy Traffic Pro-
Treatment (82833) into carpet before u_ing Cleaner. Follow
directions on the bottle.
FILLING CLEANER
WITH WATER AND
CLEANING
SOLUTION
See Figure 4
1, Open I'_1ofthe Filler Opening,
2. Add Seam AH In One Carpet Cleaner (82813) solution or
Sears Upholstery Cleaner (82843) solution to Solution Tank
(depending on type of cleaning to be performed). Follow
directions on label of bottle.
3. Pour clean, hot water (from tap) into Filler Opening in the
Solution Tank -- use two (2) gallons of water.
4. Close Filler Opening.
FILLER
OPENING
SOLUTION
TANK
i
Fig. 4
NOTE: This unit may become damaged if boiling water is used.
POWER
CORO
AND SWITCH
SeeFigure5
1. Plug Power Cord into electrical outlet.
2. Turn Power Switch to "ON* position.
POWER CORD
SWITCH
Fig. 5
Continued-
Advertisement
