Troubleshooting - DeLonghi PINGUINO PAC CN86 Instruction Manual

TROUBLESHOOTING

PROBLEM
The air conditioner does
not come on
The air conditioner works
for a short time only
The air conditioner works,
but does not cool the room
Particular odour inthe
room
The air conditioner does
not operate for about 3
minutes after turning it on
The alarm light Q comes
on
Self-diagnosis
The appliance has a self diagnosis system to identify a number of malfunctions. Error messages are displayed on the appliance
display.
IF IS DISPLAYED
"Low Temperature"
MEANS: room temperature is
too low
CAUSE
• no electricity
• it is not plugged into the mains
• the safety device has tripped
• the air exhaust hose has a constriction
• the air exhaust hose is blocked
• there are bends in the air exhaust hose
• window open
• there are heat sources in the room
(burner, lamp, etc)
• the exhaust hose is detached
• air filter clogged
• the air conditioner is not powerful
enough forthe conditions or size of
the room
• air purifying filters clogged
• the safety device has tripped
• the tank inside the appliance is full.
IF IS DISPLAYED
"High Temperature"
MEANS: room temperature is too high
Troubleshooting
• wait
• plug into the mains
• contact your service centre
• position the exhaust hose correctly
• check there are no obstacles obstructing
air discharge
• eliminate the bends
• close the window
• eliminate the heat source
• connect the exhaust hose
• clean or replace the filter
• clean or replace the filters
• wait for three minutes
• empty the tank (see "End of season
operations) on page 20).
MEANS: contact your local customer
service
21
en
REMEDY
IF IS DISPLAYED
"Probe Failure"
(sensor damaged)