Advertisement
4.To reboot the NCC computer, first press the Alt +
F4 keys simultaneously to close the NCC program.
The following window pops up:
Figure 3
NCCNT Command Center Close Window
Click the OK button. The same window pops up a
second time. Click on the OK button again.
As the NCC program is rebooting, the following
screen will display briefly:
Figure 4
FireFinder Splash Screen
5.Immediately click the EXIT button to halt the NCC
start up process.
WINDOWS NT™
C:\WINNT\System32\CMD.exe appears in the toolbar
at the bottom of the computer screen. Click on this
filename to maximize to the following window:
Figure 5
C:\WINNT\System32\CMD.exe Screen
In this window, you will see the statement: If you
do not want to restart the NCC, hit CTRL-C.
Press the Ctrl key and the C key simultaneously.
The following statement appears: Terminate
batch job (Y/N)? as shown in the following
window:
Figure 6
Terminate Batch Job (Y/N)? Screen
Choose Y and press ENTER.
From the Windows NT Start Button, click on
Shut Down. From the Shut Down menu, choose
the option to restart and press OK.
The FireFinder Splash Screen appears (see
Figure 4). Click OK or ignore it to proceed.
OS/2
When the "STARTUP.CMD" window appears,
you may do any one of the following:
• Press CTRL+C to exit the startup loop
• Open a new command window from the launch
pad
• Shutdown the system
Select Shutdown on the LaunchPad.
3
Advertisement
