Craftsman 536.886331 Owner's Manual: Auger

10 horsepower 29" dual stage 120v. electric start snow thrower.
Hide thumbs
SAFETY RULES
Never
operate
the snow
thrower
near glass
enclosures,
automobiles,
window wells drop-
offs, and the like without
proper adjustment
of
the snow discharge
angle.
Keep children
and
pets away.
Never
operate
the
snow
thrower
at
high
transport
speeds
on slippery
surfaces.
Look
behind
and use care when backing.
Never direct discharge
at bystanders
or allow
anyone
in front of the snow thrower.
Do not run the engine
indoors,
except
when
starting
the engine
and for transporting
the
snow thrower
in or out of the building.
Open
the outside doors; exhaust fumes are dangerous
(containing
CARBON
MONOXIDE,
an
ODORLESS
and DEADLY
GAS).
Take all possible
precautions
when leaving the
snow thrower unattended.
Disengage the auger/
impeller,
stop engine,
and remove key.
Do not
overload
the
machine
capacity
by
attempting
to clear snow at too fast a rate.
SAFE STORAGE
Always
refer to Owner's
Manual
instructions
for important
details if the snow thrower is to be
stored for an extended
period.
Disengage
power
to the auger/impeller
when
snow thrower
is transported
or not in use.
Never store the snow thrower
with fuel in the
fuel tank inside a building where ignition sources
are present
such
as hot water
and space
heaters,
clothes dryers, and the like. Allow the
engine to cool before storing in any enclosure.
REPAIR/ADJUSTMENTS
SAFETY
After striking a foreign object, stop the engine
and remove the wire from the spark plug, or
disconnect
the
cord
from
electric
motor.
Thoroughly
inspect
the snow thrower for any
damage,
and
repair
the
damage
before
restarting and operating the snow thrower.
If the snow
thrower should
start
to vibrate
abnormally,
stop the engine (or electric
motor)
and check immediately for the cause. Vibration
is generally a warning of trouble.
Stop the engine (or electric motor) whenever
you leave the operating position, before
un-
clogging the auger/impeller
housing
or dis-
charge guide, and when making any repairs,
adjustments,
or inspections. Remove wire from
spark plug or disconnect
cord from electric
motor.
When cleaning,
repairing,
or inspecting,
make
certain the auger/impeller
and all moving parts
have stopped.
Disconnect
the spark plug wire
and keep the wire away from the plug to prevent
accidental
starting.
Never attempt to make any adjustments
while
the engine is running (except when specifically
recommended
in this manual).
Maintain
or replace
safety
and
instruction
labels, as necessary.
Run the snow
thrower
a few minutes
after
throwing
snow
to prevent
freeze-up
of the
auger/impeller.

Advertising

   Related Manuals for Craftsman 536.886331

Comments to this Manuals

Symbols: 0
Latest comments: