Craftsman 536.886331 Owner's Manual Page 17

10 horsepower 29" dual stage 120v. electric start snow thrower.
Hide thumbs
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill In dates as you com-
plete regular service
SCHEDULE
After
Before [
Every
Every
First 2
Each
As
10
25
Each
Before
hours
Use
Needed
Hours
Hours
Season
Storage
Check Engine Oil Level '
p,4
pJ
Change Engine Oil
_
Jr_
/_
Tighten All Screws and Nuts
_
_
Check Traction Clutch Cable
Adjustment (See Cable Adjustment)
PJ
Replace Spark Plug
pJ
pJ
_justDAve Bolts
ii'
_,
_'
Lubricate All Pivot Points
_
Lubricate A uger Shaft(SeeShear
p,_
Bolt Replacement)
Lubricate D iscDrivePlate
Zerk
f,_
Drain
Fuel
f_
Check Auger
Clutch Cable
Adjustment (See Cable Adjustment)
P'/
PJ
GENERAL
RECOMMENDATIONS
The warranty on this snow thrower does not cover items
that have been subjected to operator abuse or negli-
gence. To receive full value from the warranty, operator
must maintain snow thrower as instructed in this manual.
Some adjustments will need to be made periodically to
propedy maintain your snow thrower.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each
season.
AFTER
FIRST USE
Check for any loose or damaged parts.
Tighten any loose fasteners,
Check and maintain the auger.
After each use, remove all snow and slush off the
snow thrower to prevent freezing of auger or controls.
Check contrc!s to make sure they are functioning
properly.
If any parts are worn or damaged, replace immedi-
ately.
LUBRICATION
CHART
SERVICE
DATES
17

Advertising

   Related Manuals for Craftsman 536.886331

Comments to this Manuals

Symbols: 0
Latest comments: