Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PowerBase N1F-GT-240-B
Summary of Contents for PowerBase N1F-GT-240-B
- Page 1 Electric Grass Trimmer N1F-GT-240/250-B OPERATING INSTRUCTIONS...
- Page 2 7. Dress appropriately. Do not wear loose 20. Maintain tools with care. Keep tools clean clothing or jewelry, as these can be caught in Thank you for purchasing a POWERBASE and in good condition for better and safer moving parts. Preferably wear non-slip footwear WARNING! grass trimmer.
- Page 3 ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS DESCRIPTION OF Remove the plug from the mains SYMBOLS supply immediately if the cable is damaged or cut. Symbols are used in this manual to attract your attention to possible risks. The safety symbols and the explications which Double insulation.
- Page 4 ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS PACK CONTENTS 2. ASSEMBLY THE GUARD (See Fig B.) 1. Hook Push the line guard over the cutting line spool 1. grass trimmer 2. On/off switch and onto the trimmer head. 2. safety guard Make sure that the cutting line is not trapped 3.
- Page 5 ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS OPERATING THE ON/OFF TO MANUALLY FEED THE LINE Keep all areas of the cutting head cover and WARNING! (See Fig.H) spool holder clean. SWITCH Replace the spool head cover, pressing firmly Make sure that line is fed out before operation. If required, line can be fed out manually.
-
Page 6: Trouble Shooting
ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS Your trimmer is designed to use only line with TECHINICAL DATA a maximum diameter of 1.2mm. WARNING! IMPROTANT: Before proceeding, unplug the tool. Model No. N1F-GT-240/250-B Leave approximately 100mm of line unwound and place into cleat. Rated voltage 230-240V AC 50Hz Care should be taken to ensure that the line is... -
Page 7: Ec Declaration Of Conformity
ORIGINAL INSTRUCTIONS HOME RETAIL GROUP WARNING! The vibration emission value during actual use of the power tool can differ form the declared value depending on the ways in which the tool is used dependant on the following examples and other EC DECLARATION OF CONFORMITY variations on how the tool is used: How the tool is used and the materials is cut or drilled.
Need help?
Do you have a question about the N1F-GT-240-B and is the answer not in the manual?
Questions and answers