Clean The Hook Race And Feed Dogs; Oiling The Machine - Kenmore 385.1884180 Owner's Manual

Open face cover plate and oil points as shown below at least once a year. On or
two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics,
1. Unplug the machine and remove
the presser foot and needle.
2. Remove the bobbin face cover
plate.
3. Remove the screw on the teft side
of the needle w_th the large screw
driver.
4. Remove the needle plate.
6, Use the lint brush to clean the
feed dogs, hook race and bobbin
holder. Also use a soft, dry
c1oth,
5. Take out the bobbin. Lift up the
bobbin holder and remove _t,
Line up the red marks and place
the bobbin holder so the knob fits
next to the stopper in the hook
race, as shown above.
In case machine is not used for an
extended time, oll it before sewing.
Use good quality sewing machine oil.
No other oiling is required
Above points are only area which
require oiling on this machine,
64