Insert The Bobbin Into The Bobbin Holder - Kenmore 385.1884180 Owner's Manual

Insert
the Bobbin into the Bobbin Hotder
1.
J
Put the bobbin into the bobbin
holder so that the thread feeds
counter-clockwise (left)_
2_
7
Pull about 4 inches of thread 3.
toward you through the tension
slot @.
Then pull the thread clockwise
toward the back of the machine
through the slot @ .
®
4. Slide the bobbin cover plate while
pushing it down slightly over the
bobbin, Allow about 4 inches of
thread to show above the needle
plate.
t7