Kenmore 385.1884180 Owner's Manual page 52

2o a.
b,
C.
Buttonh_e guide ptete
!
_,T_-- Template
G_d _
I "_ _ / ""Catch
I. I
Setting Mark
Gu de bock "'" _'_ _" _,-.----- Gear
'=::: " Base plate
When you have selected the template with the size and style button-
hole you need, slide the template into the guide plate.
Pull catch toward you while slidin!] the template until the button-
hole size you have chosen is at the s_,_tting mark.
insert gear of base pfate into slot of template and fit guide block
into the center of the guide slot.
3,
Top
thread
Bobbin
thread
; toot
Gear _._,//Slot
l
\
Starting
point
a, Attach the buttonhole foot.
b. Adjust position of gear so it is aligned with the starting point of
template.
The lever can be used to change gear position.
c. Pul] the bobbin thread up through guide slot by turning the hand wheel
toward you while holding top thread.
d. Place the bobbin and top threads to the left side of guide plate.
Leave 3 to 4 inches of thread.
5O