Craftsman 113.23615 Owner's Manual page 26

Knob
Z
tel:clockwise _ about three full turns.
3, Insert the blade change rod through the hole above the
blade holder and loosen the hex socket screw of the
blade holder with the "T" wrench.
4!. Remove blade from upper blade holder.
5i: Loosen th:e lower blade holder he× socket :screw in the
sarnewayaS the upper blade holder in step 3.
61 Remove blade from lower blade holder.
Blade Change Rod
Upper
Blade Holder
\.
"T" Wrench
NOTE: Teeth pointing downward.
.... T":Wrencl_
i
: : :Blad_ C hang_. : -,
Rod ::!::::: :
:: =:: :
___lower
Blade Holder
Note: Teeth
Pointing
Holder
Hex Socket
Screw
Blade
Blade Change Rod