Upper Blade Holder
2. Work Hogd-Down
Blade Support
7. Blade
Guard
8. Blade Storage
Drawer
Speed Control/
On-Off Knol_
4.
Bevel Lock Knob
3,
Lower Blade Holder
5. Bevel Scale
1. Tension
Knob ... Tightening the knob (clockwise) will
increase the tension on the blade. Loosening it (coun-
terclockwise) will deCreaSe the tension.
2. Work Hold-Down
and Blade Support
... Provides
added control of work-p!ece, protection for operator
and support for the blade_
3. Blade Holders ... Retain and position the blade,
4. Bevel Lock Knob ... Loosening knob allows the table
to tilt up to 45 ° for bevel cuts.
5. Bevel Scale .. Shows angle table is tilted for bevel
cutting.
6. Speed Control!On-Off
Knob ... For speed control set-
ting, refer to the "Choice of Blade and Speed" table.
The On-Off knob has a locking feature, This Feature
Is Intended To Help Prevent Unauthorized
Use By
Children And Others.
7. Blade Guard ... Defines area of moving blade.
8. Blade Storage
Drawer ... Used to stere blades, "T'
handle wrench, and "L" shaped rod.
14