Craftsman 113.2433 Owner's Manual page 13

4. Loosen the two setscrews which lock the upper blade
guides and separate them about 1/8".
Do that same thing to the lower guides beneath the
table. See Step 6 for location of setscrew.
UPPER THRUST BEARING 1/8" SETSCREW
WRENCH
_ SETSCREWS
5. Loosen the setscrew which locks the upper thrust
bearing and turn the knob until the thrust bearing is all
the way back as shown.
THRUSTBEARIN! i tl / UPPER THRUST BEARING
ADJ. KNOB
J t :_ /1[8" SETSCREW WRENCH
_UIDE
6. Loosen the setscrew which locks the lower thrust bear-
ing and turn the knob until the thrust bearing is aft the
way back.
LOWER THRUST BEARING
t CREW
LOWER
BLADE GUIDE-._ f
/
SETSCREW
13