Craftsman 580.768050 Operator's Manual page 6

HOW TO USE YOUR CLEANING SYSTEM
Read these instructionsand learn how to use your
cleaning system before you attempt to startyour
cleaning system. If you have any problems operating
your cleaning system, please call the pressurewasher
helpUneat 1-800-222-3136.
How To Use the NozTJes
,_ DANGER: Never exchange nozzleswithout
lockingthe safety latch on the trigger.
The quick-connect on the dual lance allows you
switch between four different nozzles. The nozzles
vary the spray pattern of the high pressurestream as
shown below.
White Green
Yellow Red
too
In order t0 Change the nozzle being used, followthese
instructions:
Engage the safety latch on the spray gun.
Safety Latch
Pull back the collar on the quick connect and pull
the current nozzle off; Store the nozzle in the space
provided on the controlpanel.
Note: For a more gentle rinse, select the 40* or 25"
degree nozzle. To scourthe surface, select the 15° or
0 ° nozzle.
• Pull backthe collar, insert the new nozzle and
release the collar, making sure it becomes flush
with the end of the quick connect. Pull on the
nozzle to make sure it is securely in place.
Note: The chemicalnozzle is permanently affixed to
your dual lance and has a spray pettem of 25
degrees. It must be used when applying chemical.
• For most effective cleaning, keep spray nozzle
between 8 to 24 inchesaway from cleaning
surface.
• Damage to the surface may occur if you get the
spray nozzle too clove to it.
Cleaning With The Nozzles ana ,_lying
Chemical
A WARNING: You must attach all hoses before
you startthe engine. Starting the engine without
all the hoses connected and without the water
turned ON will damage the pump.
IMPORTANT: Use soaps designed specificallyfor
pressure washer cleaning systems. Household
detergents could damage the pump.
Up to three (3) different solutions can be carded on the
cleaning system at one time. To apply detergent follow
these steps:
• Dilution is necessary when using the supplied
chemical packets, Simply snip one comer of the
plastic pouch, pour the chemical into the tank, then
fill the tank with clean water. Label tanks with the
provided tank labels.
Pour chemical into one of
the tanks labeled A, B, C.
6