Craftsman 580.768050 Operator's Manual page 5

KNOW YOUR HIGH CLEANING SYSTEM
Read this owner's manual and safety rules before operating your cleaning system. Compare the
illustrationswith your cleaning system to familiarize yourselfwith the locationsof various controlsand
adjustments.
System Rinse, Detergent and
Chemical Reservoirs with
Internal Filter and Baffle
Spray Gun
Dual Lance with Quick-
Connect Fitting
GasTank
Air Filter
F
High PressursHose PrimerBulb
Water Inlet
Dial-A-Cleaner'*
Selector Knob
Pressure
Command
TM
Pump
Oil Pill Cap
Air Filter - Dry type filter element limitsthe amount of
dirt and dust that gets in the engine.
DiaI-A-Clsaner
TM
Selector Knob - Selects any one
of three chemicals or the clean water system rinse.
Dual Lance with Quick-Connect Fitting- The dual
lance attaches to the spray gun and allowsyou to
switch from low pressure mode, for applying
chemicals, to high pressure mode, for cleaning.The
quick connectfitting lets you quickly exchangethe four
provided nozzles to adjust the spray pattern of the
high pressure spray.
Gas Tank - Fill gas tank with regular unleaded
gasoline hera.
High Pressure Hose - Connect one end to the spray
gun.
OII Fill Cap - Fill engine with oil here. See page 8 for
oil recommendations.
Pressure Command
TM
- Sets output water pressure.
Primer Bulb - Used to start a cold engine.
Pump - Develops high water pressure.
Spray Gun - Controlsthe applicationof water onto
cleaningsurface with triggerdevice. Includessafety
latch.
System Rinse, Detergent and Chemical Reservoirs
with Internal Filter and Baffle - Used to provide
detergent or other chemicalsto the low pressure water
stream.
Water inlet - Connectionfor garden hose.
5