Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Pressure Washer
  5. 580.768050
  6. Operator's manual

Craftsman 580.768050 Operator's Manual

7.8 horsepower 3000 psi 2.5 gpm high pressure washer cleaning system
Hide thumbs Also See for 580.768050:

Advertisement

Quick Links

Download this manual See also: Operator's Manual
Operators Manual
ICRRFTSMRN°I
7.8 Horsepower
3000 PSI
2.5 GPM
HIGH PRESSURE WASHER
CLEANING SYSTEM
Model No. 580.768050
HOURS:
Mon.- Fr|. 8 a.m. to 5 p.m. (CT)
CAUTION:
Before using this product,
read this
manual and follow all its Safety
Rules
and Operating
Instructions.
Sears, Roebuck
and Co., Hoffman
Estates,
IL 60179
Visit our Craftsman webslte: www.sears.com/craftsman
!
Part No. B3604 Draft2 (4/5/1999) Printe<:i in the U.S.A.
•
Safety
•
Assembly
•
Operation
•
Maintenance
•
Parts

Advertisement

loading

Related Manuals for Craftsman 580.768050

Summary of Contents for Craftsman 580.768050

  • Page 1 • Assembly manual and follow all its Safety Rules • Operation and Operating Instructions. • Maintenance • Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman webslte: www.sears.com/craftsman Part No. B3604 Draft2 (4/5/1999) Printe<:i in the U.S.A.
  • Page 2 Sears will repair, free of charge, any defect in matedal and workmanship. If the Craftsman engine is used for commercial or rental purposes, this warranty applies for only one year from the date of purchase.
  • Page 3 • Never move the machine by pulling on the high • The high pressure equipment is designed to be used with Sears authorized parts only. If you use pressure hose. Use the handle provided on the top of the unit. this equipment with parts that do not comply with minimum specifications, the user assumes all dsks •...
  • Page 4 • High Pressure Hose (already attached to pump) SYSTEM • Parts Box (which includes items listed below) For the most part, your Craftsman High Pressure • Spray Gun Cleaning System has been assembled at the factory. • Dual Lance with quick connect nozzle fitting You must, however, assemble the spray gun, and •...
  • Page 5 KNOW YOUR HIGH CLEANING SYSTEM Read this owner's manual and safety rules before operating your cleaning system. Compare the illustrations with your cleaning system to familiarize yourself with the locations of various controls and adjustments. System Rinse, Detergent and Spray Gun Chemical Rseervolre with Internal Filter and Baffle Gas Tank...
  • Page 6 HOW TO USE YOUR CLEANING SYSTEM • Pull back the collar on the quick connect and pull the current nozzle off. Store the nozzle in the space Read these instructions and learn how to use your provided on the control panel. cleaning system before you attempt to start your cleaning system.
  • Page 7 If the screen is damaged, the o-ring kit contains a BEFORE EACH replacement in-line filter screen and an o-ring. If • Check water inlet screen for damage. undamaged, reuse screen. • Check high pressure hose for leaks. Place the in-line filter screen into the threaded end •...
  • Page 8 Use the wire included in the kit or a small paper • 1 rubber washer (p/n B2385) for the inside of the clip to free the foreign materials clogging or garden hose connector. restricting the nozzle. • 1 water inlet screen (p/n B2384) for the garden hose connector.
  • Page 9 To clean or replace foam pre-filter: • When oil has completely drained, Install oil drain plug and tighten securely. 1. Wash pre-filter in soapy water. • Place a suitable container beneath the oil filter and 2. Squeeze pre-filter dry in clean cloth. Do not twist. turn filter counterclockwise to remove.
  • Page 10 Carburetor If you think your carburetor needs adjusting, see your nearest Sears Service Center. Engine performance may be affected at altitudes above 5000 feet. For operation at higher elevations, contact your nearest Sears Service Center. Spirk ArrHtor Adjusting Valve Clearance Scrlen S30413 After the first fifty (50) hours of operation, you should...
  • Page 11 Important: If you feel uncomfortable about doing this procedure or you don't have the proper tools, please Feeler Gusge take your cleaning system in to the nearest service center to have the valve clearance adjusted. This is a Jam Nut to very important step to insure the longest life for your In-lb= engine.
  • Page 12 DANGER: Drain fuel into approved container outdoors, away from open flame. Be sure a damaged hose. Replace the hose with the engine is cool. Do not smoke. genuine Craftsman part. • Remove all gasoline from the fuel tank to prevent •...
  • Page 13 CORRECTION CAUSE PROBLEM 1. Twist chemical valve handle Nozzle in low pressuremode. Pump has following problems: to place in low pressure mode. failureto producepressure,or 2. Clear inlet Water inlet is blocked. erraticpressure,chattering,loss of Provide adequate water flow at 3. inadequate water supply pressure,low water volume.
  • Page 15 Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 GREEN _LACKG_E_N 21 Pa_# I&.__ it__q_m_ Part# 78653 Adjust Screw A9311 Run/Stop Switch 85272 83512 L.E.D. Assembly M8 x 15mm Taptite 84195 Low Oil Shutdown Screw Decal 78604 60 Hz. Governor Spring 85620 Black Sleeving 89230...
  • Page 16 Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 Item Part# Desorlotion Item Part# Descriotlon 78621 M6-1.0 x 12mm Screw Control Rod Assembly 78606 76389 Piston Pin 76361 Governor Gear Thrust 88411 Washer Piston Ring Set A8897A 89230 M8-1.25 x 35mm Screw Gear Cover Assembly 77168 M8 x 52mm Head Bolt...
  • Page 17 Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 31------ I...te_m _ Description Breather Hose 90947 90051 Manifold Head Gasket 57058 M6 x 55mm Capscrew 80318 M6 x 25ram Capscrew 80316 M6 x 30mm Screw Intake Manifold 20136 M6 Lock Washer 22097 M6 Hex Nut 49813...
  • Page 18 Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 Item Pa_# DescriPtion Item Part # Q_tY DescriPtion 82774 Woodruff Key 94820 Expansion Plug SRV77182E 91848 Oil Filter Gasket Flywheel (220cc) 83312 Conical Washer 84982 Oil Filter Adapter 81810 M16 Hex Nut 92978 M6 x 20mm Screw A2842...
  • Page 19 Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 Item Q_ty Description 83512 M6 x 15 Taptite 95213 ,Tank Bracket 77395 M6 Flange Nut 95214 Tank Cradle 30340 12" 1/4" ID Hose 48031C Hose Clamp...
  • Page 20 Craftsman 3000 PSI Cleaning System 580.768050 Pump...
  • Page 21 Craftsman 3000 PSI Cleaning System 580.768050 Pump Ram P_a[ Item B2218 O-RING, 1.625 x .103 95416 PISTON, Thermal By- Pass B2260 ADAPTER, Engine 40945 94738 WASHER, Belleville 16 SHCS, M6 x 1 x 20 93790 x 2.7 O-RING, 114 x 119 x 93887 NUT, Jam M16 x 1.5...
  • Page 22 Craftsman 3000 PSI Cleaning System 580.768050 Main Unit 28 _...
  • Page 23 Craftsman 3000 PSI Cleaning System 580.768050 Main Unit Item Description Item Pa_# Qtv Descriotlon B3608A LINK, Throttle Control 42909 HHCS, M8 x 1.25 x 30 30809 GROMMET, Rubber 40976 SHCS, M8- 1.26 x 20 B3576 DECAL, Control Panel 1210 89476...
  • Page 24 CALIFORNIA AND FEDERAL EMISSION As the ULGE engine owner, you should be aware that Sears may deny any and/or all warranty coverage or CONTROL WARRANTY STATEMENT responsibility if your ULGE engine or a part/component of it has failed due to abuse, neglect, Warranty Rights and Obligations Your improper maintenance, unapproved modifications, or...
  • Page 25 How to File a Claim WarrantyPeriod Any warranted part which is not scheduled for If you have any questions regarding your warranty replacement as required maintenance shall be rights and responsibilities, you should contact your nearest authorized service center or call Sears at 1- warranted for 2 years.
  • Page 26 For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME" (1-800-469-4663) Para pedir servicio de reparaci(Sn a domicilio - 1-800-676-5811 In Canada for all your service and parts needs call - 1-800-665-4455 Au Canada pour tout le service ou les pieces For the repair or replacement parts you need: Call 7 am - 7 pm, 7 days a week 1-800-366-PART...