Table of Contents
Advertisement
1 INTRODUCTION
Thank you for choosing the EnviroStart Single Phase Motor Energy Control. The system
has been designed with ease of use and set up in mind. The majority of applications will
operate effectively without the need to make any changes to the default settings however
should such changes be necessary please do read through this Installation and
Commissioning Guide so as to better understand the effects of the changes you are making,
be aware of the fact that changing things like start up pedestal voltage can impact the time it
takes for a motor to get to full speed as such controllable features are inter-related.
EnviroStart has also been designed to provide a long life; components have been selected
with reliability in mind and have generally been over-rated for the power of the unit
manufactured. Using the standard IQA, (Institute of Quality Assurance), methodologies the
expected lifetime of EnviroStart is rated at 100,000 hours continuous use, (eleven and a half
years),
In the unlikely event that you do need further support please contact your local EMS
(European) Distributor or failing that contact us directly either by e-mail or fax. All details of
how to contact us are available on our web site at http://www.EnviroStart.com, please
remember that we are constantly updating documentation and information about
EnviroStart, all such information is posted and publicly available on the web site.
1.1
FEATURES
The EnviroStart is a high specification digital Soft-Start, Motor Energy Control available in
models suitable for motors up to 15A.
In addition to the provision of a soft-start, the EnviroStart MEC incorporates state of the art
Motor Energy Control technology to substantially reduce the electricity consumption of
synchronous electric induction motors whilst they are operating at less than their full load
capacity.
CONFIGURABLE ENERGY CONTROL , (BOTH FULLY AUTOMATIC AND PRESET)
SWITCHABLE SOFT START
DOL START TO OVERCOME HIGH INTERTIA LOADS
SECONDARY BY-PASS CONNECTORS BUILT INTO UNIT
FULL SYSTEM STATUS LED's
SIMPLE TO INSTALL AND COMMISSION
RUGGED HOUSING, IP43, NEMA 1. (Can be fitted into cabinet to increase to IP 65)
110V & 220V, 50/60Hz MODELS AVAILABLE
Single Phase Motor Energy Control - Page 4 of 20
Advertisement
Table of Contents
