Introduction
Switch Description
Package Contents
Front Panel
Rear Panel
Side Panel
Switch Description
The D-Link 5000 Series Data Center Switches are a series of high-performance switches that feature high port
density, routing, and ultra-low latency, designed to be deployed as Top-of-Rack (ToR), End-of-Row (EoR), or leaf-
spine switches in data center applications. Combined with ONIE support and increased cost-efficiency, the 5000
Series form a flexible long-term solution for managing and expanding data center infrastructures in a Software-defined
Networking (SDN) environment.
Package Contents
Open the shipping carton of the switch and carefully unpack its contents. The carton should contain the following
items:
For the DXS-5000-54S and DQS-5000-54SQ28:
•
One 5000 Series switch.
•
One CD containing documentation.
•
Two preinstalled AC or DC power supply modules.
•
Two AC power cords (if purchased with AC power supplies)
•
Four preinstalled fan modules.
•
One RS-232 to RJ-45 console cable.
•
One RS-232 to Mini-USB console cable.
•
One console cable extension.
•
One rack mounting kit (two brackets and screws).
•
Four rubber feet with adhesive backing.
For the DQS-5000-32S and DQS-5000-32Q28:
•
One 5000 Series switch.
•
One CD containing documentation.
•
Two preinstalled AC or DC power supply modules.
•
Two AC power cords (if purchased with AC power supplies).
•
Four preinstalled fan modules.
•
One RS-232 to RJ-45 console cable.
•
One rack mounting kit (two brackets and screws).
•
Four rubber feet with adhesive backing.
If any item is missing or damaged, please contact your local D-Link reseller for replacement.
Front Panel
Depending on the model, the front panel of the switch consists of LED indicators, a USB 2.0 port, an out-of-band
Management port (MGMT), a Console port, and a combination of QSFP28, QSFP+, SFP28, and SFP+ access ports.
5000 Series Data Center Switches Hardware Installation Guide
Figure 1-1 Front panel view of the DQS-5000-32Q28
8