Operating The Radio - Sangean PR-D15 Manual

Operating the radio

Tuning the radio
. Press the Power button to turn on the radio.
2. Select the required waveband by pressing the Band button.
There are 3 bands which are FM, AM and AUX-IN.
3. Rotate the Tuning knob to the desired frequency, shown in the
display.
4. Or, press the TUNING knob to seek for the next available station.
5. Rotate the Volume knob (on the side of the radio) to get required
sound level.
6. To turn off the radio, press the Power button.
Fine tune
This function allows you to tune the station with more specific step
increment with 0kHz in FM/ kHz in AM.
. Press the Band button to FM/ AM mode.
2. Press and hold the Tuning control until 'FINE TUNE' shown on
the display. Now you can tune the station with 0kHz in FM or
kHz in AM.
3. To cancel the function, press and hold the Tuning control until
'FINE TUNE' disappears from the display.
4